We sand parquet, floorboards and stairs throughout Berlin, Potsdam and Brandenburg – from grey period strip parquet to wide planks over underfloor heating. With dust extraction, with the matched Pallmann system and with one fixed contact person. Send us a few phone photos and we will tell you honestly what your floor can still do.
Request a free quote – with photosOr call us directly: +49 151 67357298A wooden floor does not need replacing just because it looks old. In most cases there is healthy wood beneath the worn surface – a full sanding brings it back. Typical signs:
The lacquer has worn through at doors, in the hallway or in front of the sofa; the wood turns grey and absorbs dirt.
Chair castors, pets, moves – deep scratches only come out by sanding.
Dark rings where water stood. Sanding often does the job; sometimes we replace individual strips.
Paint or ox-blood layers from past decades – underneath there are usually beautiful pine boards.
We re-glue, screw down floorboards and close joints before sanding.
Lighter, darker, more matt, oiled instead of lacquered – sanding is the chance to change the finish.
The classic in Berlin period buildings. Solid wood, can be sanded many times. We sand herringbone and mosaic in a cross pattern so that nothing tears out.
Pine and oak boards, also with paint or ox-blood layers. We screw down loose boards, fill wide joints with the 2K adhesive PALLMANN P9 and replace missing pieces.
Multi-layer floors can be sanded as long as the wear layer allows. We check this on site before we make an offer.
Lamellas glued on edge, very robust – sands well and can be re-oiled or re-lacquered.
We sand solid-wood treads by hand and with an edge sander and seal them to match the floor.
Need a new floor installed? Parquet, floorboards, design flooring, linoleum →
That depends on how much wood lies above the tongue. Solid parquet, strip parquet and old floorboards are wood all the way through and can be sanded many times over the decades. With engineered parquet and plank flooring, the thickness of the wear layer decides whether – and how often – sanding is still possible. That is why we look at every floor before making an offer; a threshold, a heating pipe or a skirting board usually tells us enough. If sanding no longer makes sense, we will tell you.
Request a free quote – with photosThis is how we work on every job – the products come from one Pallmann system so that filler, primer and finish are matched.
A few phone photos are enough. Usually within 48 hours we tell you what is feasible.
Measuring, checking the wear layer, laying out lacquer, oil and colour samples directly on your floor.
In writing, every item listed. No extras unless you ask for them.
Rooms empty, doors and transitions taped. The coarse sanding takes the old finish down to bare wood.
Joints and defects are closed with PALL-X KITT or PALL-X FILLER mixed with the floor’s own sanding dust.
Intermediate and fine sanding, edges and corners by hand – for an even look right up to the wall.
Primer (PALL-X 320/325, or 333 to enhance the grain), then two coats of lacquer with intermediate sanding – or two coats of Magic Oil 2K.
Joint final inspection, and you receive the care instructions for your finish.
A protective film on the wood: easy to care for and hard-wearing – ideal for families, kitchens and hallways. Our standard is PALL-X 96; for the heaviest use PALL-X 98.
Penetrates the wood, which stays open-pored and feels warm. Small damage can be repaired locally. We oil with Magic Oil 2K.
With the Pallmann Color Collection we tint anything from a light Scandinavian look to a smoked finish – priming and colouring in one step.
Lacquer or oil? The detailed comparison →Color Collection: all shades →All Pallmann products we work with →
For about 60 m² allow three to four days. Not full working days throughout – but each coat needs its drying time. Two days is not a serious option.
Our sanding machines run with dust extraction – far less dust than most people expect. No job site is dust-free, so we cover up and recommend removing delicate items.
Usually yes. The rooms we work in must be empty; the others remain usable. A freshly sealed floor can usually be walked on carefully the next day, furniture goes back after a few days, rugs after about two weeks.
We take over empty rooms. If you cannot manage that yourself, we clear and refurnish the rooms for an extra charge by arrangement.
All photos are from our own job sites in Berlin and Brandenburg.
Throughout Berlin – from period flats in Mitte, Prenzlauer Berg and Friedrichshain to family homes on the outskirts – in Potsdam and in Brandenburg. Travel is listed as a separate item in the offer, so there are no surprises.
Usually not. The rooms we work in must be empty – the others remain usable. Freshly sealed floors can usually be walked on carefully the next day; furniture goes back after a few days, rugs only after about two weeks.
Far less than most people expect: our sanding machines run with dust extraction. No job site is dust-free, so we cover up and recommend removing delicate items from the rooms.
Allow about three to four days. With lacquer the floor is filled twice, primed and lacquered twice, and each coat must dry. Two days is not a serious option.
Solid parquet and old floorboards many times. With engineered parquet and plank flooring the wear layer decides – we check it on site before making an offer.
Both are right; it depends on how you live. Lacquer is easy to care for and resilient, oil feels more natural and can be repaired locally. At the site visit we lay out both on your floor.
Almost always. We sand off old paint and ox-blood layers, screw down loose boards and replace damaged pieces. Send us photos – we will tell you honestly whether it is worth it.
Yes. With the Pallmann Color Collection we tint in the same step as priming. We lay out the shades as samples directly on your floor beforehand.
We take over empty rooms. If you cannot manage that, we clear and refurnish the rooms for an extra charge by arrangement – just mention it in your enquiry.
Yes. Based on photos or measurements you receive a written fixed-price offer with every item listed. Payment after handover; for larger projects in instalments according to progress.
The assessment usually comes within 48 hours. We give you the date for the work together with the offer – realistic, and we keep it.
After sanding: you will find the care instructions for lacquered and oiled floors on the home page. Cleaning and caring for parquet →
“Communication with the company worked outstandingly […] very clean and professional.” (translated from German)– Bettina F., Berlin (Aroundhome)
“Everything was carried out properly and went well.” (translated from German)– Holger V., Berlin (Aroundhome)
Send us a few photos of your floor – we usually get back to you within 48 hours with an honest assessment. No call needed, no obligation.
Request a free quote – with photos