Pallmann products we work with
We consistently install brand products: surfaces by PALLMANN, installation materials by UZIN, parquet and timber by Hinterseer, Bauwerk and HARO – resilient and textile floorings by Tarkett, Gerflor and Interface. Here are the products we work with every day:
Pallmann – the system we build every wood floor with
PALLMANN from Würzburg (Uzin Utz Group) is the parquet specialist we have worked with for years: primer, lacquer or oil, filler, colour system and care come from one source and are matched to each other. For you that means: no adhesion risk between products of different manufacturers, one data sheet, one warranty path – and care products that fit your finish exactly. Premium products are our standard, not a surcharge.
Our Pallmann Products in Detail
Sorted the way a floor is built: first the wood repair, then the primer, then the finish – the way Pallmann structures its range too.
1Filling – repairing the wood
After the coarse sanding, joints, cracks and defects are closed: the joint filler is mixed with the floor's own sanding dust so the joint matches the wood. On old floorboards with wide gaps we work with the 2K adhesive P9.
PALL-X KITT
Joint filler solution for closing joints and small imperfections during sanding – for a closed, clean floor picture before sealing.
PALL-X KITT at Pallmann →PALL-X FILLER
Water-based, fibre-reinforced joint filler solution with very good filling capacity – the premium option for wider joints and heavily worn old floors. Mixed with the floor's own sanding dust like PALL-X KITT; the fibre reinforcement keeps it in place even in deeper joints.
PALL-X FILLER at Pallmann →PALLMANN P9
Solvent-free, hard, shear-resistant and fast-setting 2K PUR universal adhesive for all types of wood flooring – including floorboards, solid wood and moisture-sensitive species, shrinkage-free even in thick layers. On old plank floors we also use it to fill the wide gaps between the boards: sandable after about six hours, then the floor is primed and sealed like parquet.
PALLMANN P9 at Pallmann →2Priming – why at all?
The primer is the layer between wood and finish. It evens out the wood's absorbency so the lacquer sits uniformly – and it prevents side-bonding: without a primer, lacquer runs into the joints and glues the strips together; on mosaic and strip parquet the wood then moves in blocks and cracks open elsewhere. The primer also sets the tone: neutral (PALL-X 320/325) or with a warm fire-up (PALL-X 333).
PALL-X 320 / 325
The matching primers under the lacquer – for a calm joint pattern, no side-bonding, and a clean system build-up.
PALL-X 320 at Pallmann →PALL-X 325 at Pallmann →
PALL-X 333
Solvent-free 2K oil-based parquet primer under PALL-X 96 POWER, PALL-X 98, PALL-X ZERO 2K or MAGIC OIL 2K ORIGINAL. According to the manufacturer it accentuates the colour and structure of the wood – the warm “firing-up” that gives an oak floor depth. With the colour concentrate PALL-X 333 C as a third component it becomes the Color Collection – priming and colouring in one step.
PALL-X 333 at Pallmann →PALL-X 333 C colour concentrate at Pallmann →
Our explanation: Pallmann Color Collection ↓
3Oil or lacquer – the finish
Two routes, one goal: lacquer puts a protective film on the wood, oil penetrates and leaves it open-pored. Which route suits you is explained on the home page under “Lacquer or oil?” – here are the products we use for both.
PALL-X 94
The proven 1K water-based lacquer for residential areas – forgiving to work with, an even finish, available in several sheen levels. A solid choice for normal living.
PALL-X 94 at Pallmann →PALL-X FUTURE
Water-based 1K parquet lacquer for normally to heavily used parquet floors in residential and light commercial areas, semi-matt or matt. Very fast drying – sandable and recoatable after about four hours –, good resistance to household chemicals, low-emission (EMICODE EC1 PLUS). Our lacquer when the job has to move quickly and the floor still has to look right.
PALL-X FUTURE product data sheet at Pallmann →PALL-X 96
Our standard: 1K water-based lacquer for heavily used parquet floors. Very hard-wearing, non-yellowing, low-emission – the classic for living spaces.
PALL-X 96 ORIGINAL at Pallmann →PALL-X 96 POWER at Pallmann →
PALL-X 98
The 2K premium lacquer for the highest demands – commercial areas, retail, staircases. Maximum abrasion and chemical resistance.
PALL-X 98 semi-matt/matt →PALL-X 98 gloss →
PALL-X PURE
Water-based 2K parquet lacquer for heavily used floors in residential and commercial areas that keeps the naturally matt look of raw wood. For everyone who wants the floor to look “untreated” but needs the protection of a lacquer.
PALL-X PURE at Pallmann →MAGIC OIL 1K EASY
The one-component oil for a simple, fast build-up – natural look, pleasant to apply, ideal for living areas with normal use.
MAGIC OIL 1K EASY at Pallmann →MAGIC OIL 2K ORIGINAL
The proven two-component oil for natural, matt wood surfaces. Emphasises the grain, feels warm, repairable in patches – our recommendation for floorboards and an oiled look.
MAGIC OIL 2K ORIGINAL at Pallmann →MAGIC OIL 2K ERGO
The high-yield 2K oil variant with extended working time – perfect for large areas and demanding projects, same natural finish.
MAGIC OIL 2K ERGO at Pallmann →MAGIC OIL 2K PURE
Solvent-free 2K parquet oil with natural oils and waxes that preserves the natural colour of the wood – no warming, no yellow tint. The most matt, lightest option in the Magic Oil system, ideal for Scandinavian-style pale oak.
MAGIC OIL 2K PURE at Pallmann →4Cleaning & care
The floor is finished – from now on, care decides. The guide is in the section Cleaning & caring for parquet.
NEUTRALREINIGER
The Pallmann neutral cleaner for regular maintenance of sealed and oiled floors – gentle, residue-free, economical. Keeps your floor beautiful for a long time.
NEUTRALREINIGER at Pallmann →
PALLMANN COLOR COLLECTION 2.0
For special wishes and a special emphasis on your floor we offer pigmenting from the Pallmann Color Collection: the 2K oil-primer system (Pall-X 333 with colour concentrates) tints and primes in one step – from a light Scandi look via warm natural tones to dark, smoked finishes. It is then finished with Magic Oil 2K or a Pall-X seal.
The best part: We come to you with the Pallmann sample case and lay out the colour tones directly on your own floor – just like in the picture. You compare in your light, on your wood, and take your time choosing something beautiful.
See all colour tones: Color Collection overview (PDF) →Colour system at the manufacturer →
Colour tones & inspiration (Pallmann blog) →
Sample Gallery – Compare and Choose
Our collection of real sample boards is growing here – primers, colour tones and complete build-ups in direct comparison. You can see and touch every sample in the original at your consultation appointment.
Full range: de.pallmann.net · Our parquet projects run through the partner portal parkett-schliff.de. We quote prices in your individual offer – matched to area and build-up. We are happy to order samples for you – just call or write.